Class-A DI boxes - or Direct Injection boxes - for the most demanding applications, where compromises in the sound is not an option.
DI02S Black Oxide
DI02S Black Oxide
1.050
ex-VAT
TBA
LTD EDITION
AVAILABLE SOON
SOLD OUT
in stock
A limited edition of our acclaimed DI02S, with a black oxide faceplate.
DI02
DI02
575
ex-VAT
TBA
LTD EDITION
AVAILABLE SOON
SOLD OUT
in stock
The ultimate DI for studio and stage
DI02S
DI02S
1.050
ex-VAT
TBA
LTD EDITION
AVAILABLE SOON
SOLD OUT
in stock
The ultimate stereo DI for studio and stage
DI02S Black Oxide
DI02S Black Oxide
1.050
ex-VAT
TBA

This unique DI02S is one of the results of tests carried out with our new method of printing front panels using direct UV printing - a process that gives us greater creative freedom while reducing our environmental impact (less toxic waste generated, Greenguard gold-certified inks...).

We printed this faceplate on a raw steel panel, treated by cold blackening process using hematite. It gives to this DI02S a truly distinctive finish, both raw and elegant.

All technical specs remain the same as the standard DI02S :

  • Class A push-pull power stage, inspired by vintage HI-FI output stages: a must for exceptional roundness and transients
  • Very high input impedance - over 4 MΩ - not loading the source, and independent of the PAD position
  • 0 or +13dB input gain
  • OUTPUT PAD (-12/-24/-36dB) allowing to input microphone preamplifiers after the DI02S
  • Max input level: +9dBU without PAD | +18dBU with PAD
  • Max output level: +22dBU without PAD | +19dBU with PAD
  • Output transformer: Carnhill VT24499
  • Integrated buffer circuit on the LINK output
  • Rear instrument input, linked to the front panel input (could be used as a second LINK OUT, but will not benefit from the BUFFER)
  • VU Meter to monitor how hard you hit the output transformers (including clipping indicator)
  • Earth lift on the XLR outputs to avoid ground loops (independent for each channel)
  • Frequency response (1kΩ load) : ±1.0dB from 5.4Hz to 25+kHz | ±0.2dB from 20Hz to 20kHz
  • SNR : >102dB (0.2% max THD)
  • Worldwide compatible power supply: 100-240V | 50-60Hz
  • Dimensions (1U rack) : 483x260x44mm | 19.0x10.2x1.7in
  • Weight : 4.3kg | 9.4lb

Designed and assembled in our workshop in Saint-Vérand (France). All parts are manufactured by our beloved partners in France & Europe.

DI02
DI02
575
ex-VAT
TBA
  • Class A push-pull power stage, inspired by vintage HI-FI output stages: a must for exceptional roundness and transients
  • Very high input impedance - over 4 MΩ - not loading the source, and independent of the PAD position
  • Max input level: +9dBU without PAD | +18dBU with PAD
  • Max output level: +22dBU without PAD | +19dBU with PAD
  • Output transformer: Carnhill VT24499
  • Integrated buffer circuit on the LINK output
  • Earth lift on the output XLR to avoid ground loops
  • LED button to switch off the front panel backlighting
  • Frequency response (1kΩ load) : ±1.0dB from 5.4Hz to 25+kHz | ±0.2dB from 20Hz to 20kHz
  • SNR : >102dB (0.2% max THD)
  • Worldwide compatible power supply: 100-240V | 50-60Hz
  • Dimensions : 220x160x47mm | 8.7x6.2x1.8in
  • Weight : 1.85kg | 4.1lb

Designed and assembled in our workshop in Saint-Vérand (France). All parts are manufactured by our beloved partners in France & Europe.

DI02S
DI02S
1.050
ex-VAT
TBA
  • Class A push-pull power stage, inspired by vintage HI-FI output stages: a must for exceptional roundness and transients
  • Very high input impedance - over 4 MΩ - not loading the source, and independent of the PAD position
  • 0 or +13dB input gain
  • OUTPUT PAD (-12/-24/-36dB) allowing to input microphone preamplifiers after the DI02S
  • Max input level: +9dBU without PAD | +18dBU with PAD
  • Max output level: +22dBU without PAD | +19dBU with PAD
  • Output transformer: Carnhill VT24499
  • Integrated buffer circuit on the LINK output
  • Rear instrument input, linked to the front panel input (could be used as a second LINK OUT, but will not benefit from the BUFFER)
  • VU Meter to monitor how hard you hit the output transformers (including clipping indicator)
  • Earth lift on the XLR outputs to avoid ground loops (independent for each channel)
  • Frequency response (1kΩ load) : ±1.0dB from 5.4Hz to 25+kHz | ±0.2dB from 20Hz to 20kHz
  • SNR : >102dB (0.2% max THD)
  • Worldwide compatible power supply: 100-240V | 50-60Hz
  • Dimensions (1U rack) : 483x260x44mm | 19.0x10.2x1.7in
  • Weight : 4.3kg | 9.4lb

Designed and assembled in our workshop in Saint-Vérand (France). All parts are manufactured by our beloved partners in France & Europe.

DI02S Black Oxide
DI02S Black Oxide
1.050
ex-VAT
TBA
B-stock !

This unique DI02S is one of the results of tests carried out with our new method of printing front panels using direct UV printing - a process that gives us greater creative freedom while reducing our environmental impact (less toxic waste generated, Greenguard gold-certified inks...).

We printed this faceplate on a raw steel panel, treated by cold blackening process using hematite. It gives to this DI02S a truly distinctive finish, both raw and elegant.

All technical specs remain the same as the standard DI02S :

  • Class A push-pull power stage, inspired by vintage HI-FI output stages: a must for exceptional roundness and transients
  • Very high input impedance - over 4 MΩ - not loading the source, and independent of the PAD position
  • 0 or +13dB input gain
  • OUTPUT PAD (-12/-24/-36dB) allowing to input microphone preamplifiers after the DI02S
  • Max input level: +9dBU without PAD | +18dBU with PAD
  • Max output level: +22dBU without PAD | +19dBU with PAD
  • Output transformer: Carnhill VT24499
  • Integrated buffer circuit on the LINK output
  • Rear instrument input, linked to the front panel input (could be used as a second LINK OUT, but will not benefit from the BUFFER)
  • VU Meter to monitor how hard you hit the output transformers (including clipping indicator)
  • Earth lift on the XLR outputs to avoid ground loops (independent for each channel)
  • Frequency response (1kΩ load) : ±1.0dB from 5.4Hz to 25+kHz | ±0.2dB from 20Hz to 20kHz
  • SNR : >102dB (0.2% max THD)
  • Worldwide compatible power supply: 100-240V | 50-60Hz
  • Dimensions (1U rack) : 483x260x44mm | 19.0x10.2x1.7in
  • Weight : 4.3kg | 9.4lb

Designed and assembled in our workshop in Saint-Vérand (France). All parts are manufactured by our beloved partners in France & Europe.

Close
Sorry, we don't have additional images for this product.
More images
DI02
DI02
575
ex-VAT
TBA
B-stock !
  • Class A push-pull power stage, inspired by vintage HI-FI output stages: a must for exceptional roundness and transients
  • Very high input impedance - over 4 MΩ - not loading the source, and independent of the PAD position
  • Max input level: +9dBU without PAD | +18dBU with PAD
  • Max output level: +22dBU without PAD | +19dBU with PAD
  • Output transformer: Carnhill VT24499
  • Integrated buffer circuit on the LINK output
  • Earth lift on the output XLR to avoid ground loops
  • LED button to switch off the front panel backlighting
  • Frequency response (1kΩ load) : ±1.0dB from 5.4Hz to 25+kHz | ±0.2dB from 20Hz to 20kHz
  • SNR : >102dB (0.2% max THD)
  • Worldwide compatible power supply: 100-240V | 50-60Hz
  • Dimensions : 220x160x47mm | 8.7x6.2x1.8in
  • Weight : 1.85kg | 4.1lb

Designed and assembled in our workshop in Saint-Vérand (France). All parts are manufactured by our beloved partners in France & Europe.

Close
Sorry, we don't have additional images for this product.
More images
DI02S
DI02S
1.050
ex-VAT
TBA
B-stock !
  • Class A push-pull power stage, inspired by vintage HI-FI output stages: a must for exceptional roundness and transients
  • Very high input impedance - over 4 MΩ - not loading the source, and independent of the PAD position
  • 0 or +13dB input gain
  • OUTPUT PAD (-12/-24/-36dB) allowing to input microphone preamplifiers after the DI02S
  • Max input level: +9dBU without PAD | +18dBU with PAD
  • Max output level: +22dBU without PAD | +19dBU with PAD
  • Output transformer: Carnhill VT24499
  • Integrated buffer circuit on the LINK output
  • Rear instrument input, linked to the front panel input (could be used as a second LINK OUT, but will not benefit from the BUFFER)
  • VU Meter to monitor how hard you hit the output transformers (including clipping indicator)
  • Earth lift on the XLR outputs to avoid ground loops (independent for each channel)
  • Frequency response (1kΩ load) : ±1.0dB from 5.4Hz to 25+kHz | ±0.2dB from 20Hz to 20kHz
  • SNR : >102dB (0.2% max THD)
  • Worldwide compatible power supply: 100-240V | 50-60Hz
  • Dimensions (1U rack) : 483x260x44mm | 19.0x10.2x1.7in
  • Weight : 4.3kg | 9.4lb

Designed and assembled in our workshop in Saint-Vérand (France). All parts are manufactured by our beloved partners in France & Europe.

Close
Sorry, we don't have additional images for this product.
More images