• Max Gain: 67dB
• Pad: -33dB
• Output level: 0 to -30dB
• +48V Phantom Power (independent for each channel)
• Polarity switch
• Discrete 12dB/octave HPF (High Pass Filter) variable from 20Hz to 315Hz

• Input transformers: Neutrik NTM-4
• Output transformers: Carnhill VT24499

• Frequency response (1kΩ load): ±1dB from 6.2Hz to 25KHz
• Mic input impedance: 1.2kΩ
• DI input impedance: > 1.0MΩ
• Output impedance: < 20Ω - Transformer balanced
• Equivalent Input Noise (EIN): -125dBu @ max gain (Mic input)

• Max input level: +9dBU without PAD | +18dBU with PAD
• Max output level: +22dBU without PAD | +19dBU with PAD

• Earth lift on the XLR outputs to avoid ground loops (independent for each channel)

• Worldwide compatible power supply: 100-240V | 50-60Hz
• Dimensions (1U rack) : 483x260x44mm | 19.0x10.2x1.7in
• Weight : 4.3kg | 9.4lb

• Available accessories : V-LOCK power cable

Designed and assembled in our workshop in Saint-Vérand (France). All parts are manufactured by our beloved partners in France & Europe.

Versatile microphone preamp & DI :

• Max Gain: 67dB
• Pad: -33dB
• Output level: 0 to -30dB
• +48V Phantom Power (independent for each channel)
• Polarity switch
• Discrete 12dB/octave HPF (High Pass Filter) variable from 20Hz to 315Hz

• Input transformer: Neutrik NTM-4
• Output transformer: Carnhill VT24499

• Frequency response (1kΩ load): ±1dB from 6.2Hz to 25KHz
• Mic input impedance: 1.2kΩ
• DI input impedance: > 1.0MΩ
• Output impedance: < 20Ω - Transformer balanced
• Equivalent Input Noise (EIN): -125dBu @ max gain (Mic input)

• Max input level: +9dBU without PAD | +18dBU with PAD
• Max output level: +22dBU without PAD | +19dBU with PAD

Classic semi-parametric EQ based on the original Studer 169 console circuit :

• High Shelf : ±15dB @ 20kHz
• "Presence" filter : ±11dB @ 150 to 7000Hz (continuously variable) - Q ≈ 1.0
• Low Shelf : ±15dB @ 20Hz

• Transformerless input & output for a transparent sound
• Max level (input & output) : +22dBU
• Input impedance: 48kΩ
• Output impedance: 50Ω

• Frequency response (1kΩ load): ±0.5dB from 5.4Hz to 25kHz
• SNR : >105dB (0.2% THD)
• Bypass on relay for transparent sound

• Earth lift on the XLR outputs to avoid ground loops (independent for each channel)

• Worldwide compatible power supply: 100-240V | 50-60Hz
• Dimensions (1U rack) : 483x260x44mm | 19.0x10.2x1.7in
• Weight : 3.9kg | 8.6lb

• Included accessory : small XLR cable for Channel Strip use
• Optional accessory : V-LOCK power cable

Designed and assembled in our workshop in Saint-Vérand (France). All parts are manufactured by our beloved partners in France & Europe.

• API© style 500 series format
• Max Gain: 67dB
• Pad: -33dB
• Output level: 0 to -30dB
• +48V Phantom Power
• Polarity switch
• Discrete 12dB/octave HPF (High Pass Filter) variable from 20Hz to 315Hz
  ‍
• Input transformer: Neutrik NTM-4
• Output transformer: Carnhill VT24499
  ‍
• Frequency response (1kΩ load): ±1dB from 6.2Hz to 25KHz
• Mic input impedance: 1.2kΩ
• DI input impedance: > 1.0MΩ
• Output impedance: < 20Ω - Transformer balanced
• Equivalent Input Noise (EIN): -125dBu @ max gain (Mic input)
• Power consumption: 120mA | Peak 215mA

Designed and assembled in our workshop in Saint Vérand (France). All parts are manufactured by our beloved partners in France & Europe.

• Class A push-pull power stage, inspired by vintage HI-FI output stages: a must for exceptional roundness and transients
• Very high input impedance - over 4 MΩ - not loading the source, and independent of the PAD position
• 0 or +13dB Gain, allowing to input preamps or converters in the best conditions

• Max input level: +9dBU without PAD | +18dBU with PAD
• Max output level: +22dBU without PAD | +19dBU with PAD

• Output transformer: Carnhill VT24499
• Integrated buffer circuit on the LINK output
• Earth lift on the output XLR to avoid ground loops
• LED button to switch off the front panel backlighting

• Frequency response (1kΩ load) : ±1.0dB from 5.4Hz to 25+kHz | ±0.2dB from 20Hz to 20kHz
• SNR : >102dB (0.2% max THD)

• Worldwide compatible power supply: 100-240V | 50-60Hz
• Dimensions : 220x160x47mm | 8.7x6.2x1.8in
• Weight : 1.85kg | 4.1lb

• Touring bag included
• ‍V-LOCK power cable included

Designed and assembled in our workshop in Saint-Vérand (France). All parts are manufactured by our beloved partners in France & Europe.

• Class A push-pull power stage, inspired by vintage HI-FI output stages: a must for exceptional roundness and transients
• Very high input impedance - over 4 MΩ - not loading the source, and independent of the PAD position
• 0 or +13dB input gain
• OUTPUT PAD (-12/-24/-36dB) allowing to input microphone preamplifiers after the DI02S

• Max input level: +9dBU without PAD | +18dBU with PAD
• Max output level: +22dBU without PAD | +19dBU with PAD

• Output transformer: Carnhill VT24499
• Integrated buffer circuit on the LINK output
• Rear instrument input, linked to the front panel input (could be used as a second LINK OUT, but will not benefit from the BUFFER)
• VU Meter to monitor how hard you hit the output transformers (including clipping indicator)
• Earth lift on the XLR outputs to avoid ground loops (independent for each channel)

• Frequency response (1kΩ load) : ±1.0dB from 5.4Hz to 25+kHz | ±0.2dB from 20Hz to 20kHz
• SNR : >102dB (0.2% max THD)

• Worldwide compatible power supply: 100-240V | 50-60Hz
• Dimensions (1U rack) : 483x260x44mm | 19.0x10.2x1.7in
• Weight : 4.3kg | 9.4lb

• Available accessories : V-LOCK power cable

Designed and assembled in our workshop in Saint-Vérand (France). All parts are manufactured by our beloved partners in France & Europe.

• Designed for the SEPIA platform‍

• Max Gain: 67dB
• Pad: -33dB
• Output level: 0 to -30dB
• +48V Phantom Power
• Polarity switch
• Discrete 12dB/octave HPF (High Pass Filter) variable from 20Hz to 315Hz
  ‍
• Input transformer: Neutrik NTM-4
• Output transformer: Carnhill VT24499
  ‍
• Frequency response (1kΩ load): ±1dB from 6.2Hz to 25KHz
• Mic input impedance: 1.2kΩ
• Equivalent Input Noise (EIN): -125dBu @ max gain (Mic input)

Full technical details are still to be announced.

Designed and assembled in our workshop in Saint Vérand (France). All parts are manufactured by our beloved partners in France & Europe.