DI02S #JAV1

• Class A push-pull power stage, inspired by vintage HI-FI output stages: a must for exceptional roundness and transients
• Very high input impedance - over 4 MΩ - not loading the source, and independent of the PAD position
• 0 or +13dB input gain
• OUTPUT PAD (-12/-24/-36dB) allowing to input microphone preamplifiers after the DI02S

• Max input level: +9dBU without PAD | +18dBU with PAD
• Max output level: +22dBU without PAD | +19dBU with PAD

• Output transformer: Carnhill VT24499
• Integrated buffer circuit on the LINK output
• Rear instrument input, linked to the front panel input (could be used as a second LINK OUT, but will not benefit from the BUFFER)
• VU Meter to monitor how hard you hit the output transformers (including clipping indicator)
• Earth lift on the XLR outputs to avoid ground loops (independent for each channel)

• Frequency response (1kΩ load) : ±1.0dB from 5.4Hz to 25+kHz | ±0.2dB from 20Hz to 20kHz
• SNR : >102dB (0.2% max THD)

• Worldwide compatible power supply: 100-240V | 50-60Hz
• Dimensions (1U rack) : 483x260x44mm | 19.0x10.2x1.7in
• Weight : 4.3kg | 9.4lb

• Available accessories : V-LOCK power cable

Designed and assembled in our workshop in Saint-Vérand (France). All parts are manufactured by our beloved partners in France & Europe.